Set up a D-Link extender DAP 1820 to expand your home’s wifi coverage to every area. Simply install the D-Link extender anyplace in your home to bid adieu to spotty wifi. Take advantage of internet access even in your home’s more difficult-to-reach places. It has a one-touch Dlink DAP 1820 Setup feature that enables you to quickly build up a larger network.Using the D-Link wifi app on your smartphone, you can also control your D-Link network.
Steps for configuring the D-Link DAP 1820 with the Dlink app:
The application can be easily downloaded to a mobile device from the Google Play Marketplace or App Store.The instructions for setting up for a DLink extender can be found below. Pay close attention to the steps.
- Installing the D-Link app on your phone is the first step. You may get the app by scanning the QR code or by downloading it from the app store on your smartphone.
- Next, position your D-Link extender where your router is located in the center of your house. After plugging it in, watch for the power light to illuminate.
- After that, link your smartphone to the D-Link wireless network. Make use of the device’s printed default SSID.
- Next, launch your smartphone’s “D-Link” app and select “New device Setup.”The next thing to do will be to choose whatever device you wish to set up.
- The application’s UI will then show you a list of every wifi network that is available.. To extend the network of the wireless router, you must tap on its SSID.
- The application will then request that you input its wireless passkey. Enter the network’s wireless security key for your router.
- You will now be prompted by the application to set up a new D-Link network wireless name and passkey.
- Next, finish the Dlink DAP 1820 Setup by following the in-app instructions.
How can I use the WPS button for configuring a D-link DAP 1820 extender?
You can configure a D-Link extension using the WPS button.After that, connect the D-Link extender to the power supply and position it in the same room as your wireless router. Prior to pressing the D-Link DAP 1820 button, you must press the wireless router’s WPS button. When the D-Link device connects to the router, its WPS light will blink. The WPS light will stabilize after some time.
This shows that your D-Link DAP 1820 extender is connected to the wifi router.The D-Link DAP1820 extender is a fantastic tool that will enable you to connect to wifi even in the most remote areas of your home. The web browser approach, the WPS button, or the mobile app can all be used to set it up. You can also phone our toll-free number and ask our professionals for guidance if you’re a little confused about setting up your D-Link extender.
Configuring the D-LINK DAP-1820 WI-FI RANGE EXTENDER
The D-Link DAP1820 should be plugged in closer to your router. Once configured, you can relocate it to the location of your choice.
- Go to your computer’s or network device’s wireless settings.
- After choosing the name of the Wi-Fi network, input the password.
- The DAP-1820 can also be correlated with a network or computer using an Ethernet wire.
- Navigate to dlinkap.local with a web browser.
- The dlink login screen will show up after you connect. After entering your password, select Log in.
- Your current status will be shown on the home page. After choosing your preferred language from the drop-down menu, click “Next.”
- Decide which wireless network to expand.
- If your network is secure, click “Next” after entering the Wi-Fi password.
- If you choose Manual, click next to proceed after entering the wireless network’s name and password.
- Establish a connection between D-Link DAP1820 to your network via an Ethernet connection. Set a new password and Wi-Fi network name for the DAP-1820.
- Enter the DAP-1820’s administrator password. Internet-based configuration can be accessed using the administrator password.
- Your settings will be shown on a summary page. When you click “Finish,” the DAP-1820 will restart. Everything is put up.
How can I go back to the factory default settings on my D-link DAP extender?
- Connect the extension to a power source. After a few seconds, the front LED will change from red to either orange or green.
- The extender has a reset pinhole on the bottom.The front light may become red if you hold down the reset button with a paperclip for ten seconds..
- After rebooting, the extender will be back to its original factory settings.
How do I edit the d-link DAP Extender asdministrator Password?
- In the address box of a web browser, type http://dlinkap.local.
- In the designated field, type your administrator password.
- After selecting Management, choose Admin.
- To modify the Administrator password, type a new one in the Admin Password area.
- To save the changes, click Save.
Do I need to upgrade my D-link DAP Extender’s Firmware?
- In the address box of a web browser, type dlinkap.local.
- Put in your administrator password.
- From the drop-down menu, choose Upgrade after clicking on Management.
- Automatic Upgrade: The gadget will look for updated firmware on its own. To start the upgrade process, click Upgrade Firmware if a new firmware version is discovered.
- Manual Upgrade: Go to the D-Link website and download the firmware file. Find the firmware file you downloaded by clicking the Select File button.
- When the firmware update is finished, the D-Link extender will resume on its own.
Conclusion
With the guidelines stated above you easily perform Dlink DAP 1820 Setup if in case you failed to do so then taking help from our representatives will be a relief . They will help you to effectively resolve your issues.
